Fuel Injector (cont)

TM 10-3930-638-24&P

3-6. FUEL SYSTEM MAINTENANCE (cont)

b. Fuel Injector (cont).

STEP

ITEM

LOCATION

ACTION

REMARKS

REMOVAL (cont)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

Use cleaning solvent P-D-680 and dry

Clean

Cylinder head fuel injec-

thoroughly. Remove all dirt and burrs

tor seal surfaces

which could cause distortion of fuel

injector when clamping in place

WARNING

Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible

blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

3-77