Hydraulic Oil Filter Assembly (cont). - TM-10-3930-638-24-P0497

TM 10-3930-638-24&P

2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

g. Hydraulic Reservoir (cont).

(2) Hydraulic Oil Filter Assembly (cont).

ITEM

ACTION

REMARKS

LOCATION

STEP

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

Use cleaning solvent P-D-680

All parts

Clean

INSPECTION

Fittings (4 and 8)

Inspect

Replace if threads damaged

Replace if cracked, distorted, or threads

Filter head assembly (5)

Inspect

damaged

Replace if damaged

Inspect

Bypass valve (6)

Replace if deformed, damaged, or

Inspect

Bypass spring (7)

permanently set

INSTALLATION

Engine compart-

a. Fitting (8)

Install

b. Bypass spring (7)

Install in filter

ment, front

head assembly

(5)

Install in filter

c. Bypass valve (6)

head assembly

(5)

Rotate clockwise to install

d. Filter head assembly (5) Install on fitting

(8)

e. Fitting (4)

Install in filter

head assembly

(5)

Para 2-31e(1)

Install

f. Hydraulic filter re-

striction switch (3)

2-445