Hydraulic Oil Filter Assembly (cont). - TM-10-3930-638-24-P0496

TM 10-3930-638-24&P

2-56. HYDRALIC LIFY SYSTEM MAINTENANCE (cont)

g. Hydraulic Reservoir (cont).

(2) Hydraulic Oil Filter Assembly (cont).

ITEM

LOCATION

ACTION

STEP

REMARKS

REMOVAL

a. Hydraulic oil filter (1)

Engine compart-

Remove

Use clamp type filter wrench

ment, front

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

b. Filter head assembly

Clean

Use clean cloth moistened with cleaning

(5)

solvent P-D-680

NOTE

Don't perform following steps unless filter head assembly, bypass

valve, or bypass spring has been damaged and replacement is

necessary.

c. Tube fitting (2)

Loosen and dis-

connect

d. Hydraulic filter

Para 2-31e(1)

Remove

restriction switch (3)

e. Fitting (4)

Remove

f. Filter head assembly (5) Remove

Turn off fitting by rotating counter-

clockwise

g. Bypass valve (6)

Remove

h. Bypass spring (7)

Remove

i. Fitting (8)

Remove from

hydraulic

reservoir

2-444