FRAME AND TOWING ATTACHMENTS TROUBLESHOOTING

TM 10-3930-638-24&P

2-50. FRAME AND TOWING ATTACHMENTS TROUBLESHOOTING (cont)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

3. TOW BAR DOES NOT PIVOT OR LATCH

Check chassis where tow bar is attached for obstructions.

Step 1.

a. If obstructed, remove obstruction.

b. If not obstructed, proceed to step 2

Step 2. Check chassis, tow bar, and mounting hardware for cracks or dents.

a. If tow bar is dented or cracked, replace (para 2-52c).

b. If tow bar is okay, proceed to step 3.

Step 3. Check tow bar bracket for loose mounting, dents, or cracks.

Tighten mounting hardware; replace bracket if cracked or dented (para 2-52c).

2-51. BODY, CAB AND HOOD TROUBLESHOOTING

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. SIDE PANEL DOES NOT LATCH

Step 1. Inspect hood panel lock bracket on chassis for damage, dents or missing condition.

Check for loose mounting hardware.

a. Replace hood panel lock bracket (para 2-53c), if damaged or dented; tighten loose mounting

hardware.

b. If bracket is okay and hardware is tight, proceed to step 2

Step 2. Check hood panel hook for damage, cracks, or missing condition.

Check hook for unrestricted movement.

a. If hood panel hook is damaged, cracked or missing, replace (para 2-53c).

b. If hood panel hook is okay, proceed to step 3 below.

Step 3. Check side panels for damage or dents.

Replace side panels if damaged or dented.