 |
|||
|
|
|||
|
Page Title:
Steering Cylinder Assembly (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-48. STEERING SYSTEM MAINTENANCE (cont)
c. Steering Cylinder Assembly (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don't breathe vapors. Do not use near open flame or
excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical
attention. If contact with skin or clothes is made, flush with large
amounts of water. If contact with eyes is made, wash eyes with
water immediately, and obtain medical aid immediately.
Use cleaning solvent P-D-680
2
All parts
Clean
INSPECTION
Replace if damaged
Hose clamps (2) and
Inspect
3
steering cylinder guard
(3)
4
Hose fittings (4 and 6)
Replace hose assembly if threads damaged
Inspect
5
Elbows (5 and 7)
Inspect
Replace if cracked, distorted, or threads
damaged
6
Retaining rings (8 and 10)
Replace if cracked, bent, or distorted
Inspect
and pins (9 and 11)
7
Replace if cracked or distorted. Check
Steering cylinder
Inspect
assembly (12)
internal threads for damage; chase using
9/16-18 UNF tap
INSTALLATION/REPLACEMENT
8
Side of vehicle
a. Steering cylinder
Position
assembly (12)
b. Pin (11)
Install
c. Retaining ring (10)
Install
d. Pin (9)
Install
e. Retaining ring (8)
Install
f. Elbow (7)
Install
g. Hose fitting
Connect and
(6)
tighten
h. Elbow (5)
Install
2-350 CHANGE 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals