|
|
TM 10-3930-638-24&P
2-48. STEERING SYSTEM MAINTENANCE (cont)
b. Hoses, Lines and Fittings (cont).
(2) Hydraulic Pump to Steering Gear (cont).
REMARKS
ACTION
ITEM
STEP
LOCATION
CLEANING (cont)
5
All parts
Use cleaning solvent P-D-680
Clean
INSPECTION
6
Hose fittings ( 1,7,9,12,29,
Replace hose assembly (8. 10,13 or 31) if
Inspect
and 31)
damaged
7
Tube fittings (3,5, 15 and
Inspect
Replace tube assembly (6 and 22) if
16)
damaged
8
Hose assemblies (8, 10,13
Inspect
Replace if cracked, split, or fitting threads
and 32) and hose (35)
damaged. If necessary, make hose (35)
from FSCM 24161 PIN 24 VW; cut to
23 inches long
9
Adapters (2, 14, and 23)
Inspect
Replace if cracked, distorted, or threads
connectors (4 and 33),
damaged
tee (11 ), and elbows (30
and 36)
10
Tube assemblies (6 and
Inspect
Replace if cracked, kinked, dented,
22)
twisted, or fitting threads damaged
11
Clamp (21)
Inspect
Replace if bent or cracked
12
Relief valve (28)
Inspect
Replace if cracked or threads damaged
13
Replace if damaged
Inspect
Hose clamps (34)
INSTALLATION/REPLACEMENT
14
Engine compart-
a. Elbow (36)
Install in
ment
hydraulic
reservoir
b. Two hose clamps (34)
Position on both
ends of hose (35)
c. Hose (35)
Install
d. Hose clamps (34)
Tighten both
e. Connector (33)
Install in
hydraulic pump
f. Hose assembly (32)
Position
g. Hose fitting (31)
Connect and
tighten
15
Front chassis,
a. Elbow (30)
Install in brake
bottom right side
valve ports
2-343
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |