|
|
TM 10-3930-638-24&P
2-48. STEERING SYSTEM MAINTENANCE (cont)
b. Hoses, Lines and Fititngs (cont).
(2) Hydraulic Pump to Steering Gear (cont).
ITEM
STEP
LOCATION
ACTION
REMARKS
REMOVAL (cont)
1. Two nuts (24), lock
Remove
3
washers (25). washers
(cont)
(26), and cap
screws (27)
m. Relief valve (28)
Remove
n. Hose fitting (29)
Loosen and
disconnect
o. Elbow (30)
Remove
4
Engine compart-
a. How fitting (31)
Loosen and
ment, hydraulic
disconnect
pump
b. Hose assembly (32)
Remove
c. Connector (33)
Remove
NOTE
If hose (35) requires replacement. drain
hydraulic reservoir before removing hose.
d. Two hose clamps (34)
Loosen
e. Hose (35)
Remove
f. Elbow (36)
Remove
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don't breathe vapors. Do not use near open flame or
excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical
attention. If contact with skin or clothes is made, flush with large
amounts of water. If contact with eyes is made, wash eyes with
water immediately, and obtain medical aid immediately.
2-342
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |