 |
|||
|
|
|||
|
Page Title:
Brake Pedal and Declutch Pedal (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-43. SERVICE BRAKE MAINTENANCE (cont)
e. Brake Pedal and Declutch Pedal (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
CLEANING (cont)
Clean
Use cleaning solvent P-D-680. Dry thor-
3
All parts
oughly with compressed air
INSPECTION
Inspect
Replace if cracked, distorted, or coil
4
Springs (3)
broken
Replace if worn, pitted, burred or damaged
Pivot pin (8), declutch
Inspect
5
pedal (9), brake pedal
(10). yoke (12) and
pins (1 and 2)
Inspect
Replace if worn, or if threads damaged
All hardware
6
REASSEMBLY
a. Cap screws (15)
Position
On pedal spring bracket.
Pedals (9
7
Until screw (15) is securely mounted
Install and
b. Two lock nuts (14)
and 10)
tighten
Install
On end of cap screw (15). Do not tighten
c. Two lock nuts
(14)
against inside lock nut (14) or spring
bracket on pedal
Until fitting (13) is securely mounted
d. Two grease fittings
Install and
tighten
(13)
INSTALLATION
Install
On brake pedal yoke (12)
a. Lock nut (11)
8
Front chassis,
Install
Turn clockwise into brake valve push rod
b. Brake pedal yoke (12)
bottom left
side
NOTE
Do not tighten lock nut (11) against brake valve push rod at this
time.
Position and
On pedal bracket
c. Pedals (9 and 10)
install
and pivot pin (8)
Push in
Pivot pin (8)
d. Eye rod (7)
e. Cap screw (6), lock
Install and
Until eye rod (7) is securely mounted
tighten
washer (5) and
nut (4)
f. Two springs (3)
Install
Position
On brake pedal (10)
g. Brake pedal yoke
(12)
2-317
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals