Brake Pedal and Declutch Pedal (cont). - TM-10-3930-638-24-P0354

TM 10-3930-638-24&P

2 - 4 3 . SERVICE BRAKE MAINTENANCE (cont)

c. Brake Pedal and Declutch Pedal (cont).

ITEM

ACTION

REMARKS

LOCATION

STEP

REMOVAL

Remove

Front chassis,

a. Cotter pin (1) and

bottom left

clevis pin (2)

Unhook and remove Use pliers

side

b. Two springs (3)

c. Nut (4), lock washer

Loosen and remove Support eye rod (7)

(5) and cap screw

(6)

Pull and remove

d. Eye rod (7)

From pivot pin (8)

e. Pivot pin (8)

Pull and remove

Support pedals (9 and 10)

f. Declutch pedal (9)

Lower and

From vehicle

remove

and brake pedal

(10)

g. Lock nut (11)

Loosen

Unscrew from nut on brake valve push rod

h. Brake pedal yoke

Remove

Unscrew from brake valve push rod

(12)

DISASSEMBLY

Pedals (9 and

a. Two grease fittings

Remove

From pedals

10)

(13)

Loosen and

From pedals

b. Two lock nuts (14)

remove

and cap screws (15)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Fail-

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

2-316