 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-42. PARKING BRAKE MAINTENANCE (cont)
a. Parking Brake Linkage (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
INSTALLATION/REPLACEMENT (cont)
a. Adjusting nut (10)
Loosen
Until just held onto cable by three or
13
Parking brake
four threads
cable (8)
b. Adjusting nut (9)
Adjust
Until just touches top of clevis
a. Parking brake cable (8) Position clevis on
Clevis on threaded end of cable (8)
14
Parking brake
connects to actuating lever
actuating lever
actuating lever;
align holes
Install
b. Clevis pin (24)
Connect parking brake cable (8) clevis
to actuating lever
c. Washer (23)
Position
Install
d. Cotter pin (22)
Bend over end
Position
Between parking brake cable (8) and
15
a. Plate (21)
Transmission,
bracket (27)
left side, above
b. U bolt (20)
Install
parking brake
Secures parking brake cable (8) and
plate (21)
c. Two lock washers (19)
Install
and nuts (18)
16
a. Clamp (17)
Install and
Operator's com-
On parking brake cable (8)
position
partment, rear
Install
b. Cap screw (16)
Secures clamp (17) to rear chassis
c. Lock washer (15) and
Install
nut (14)
17
Parking brake
a. Parking brake cable (8) Position
In lever (4); align holes in clevis and lever
lever (4)
clevis
Install
b. Pin (7)
Connects clevis and lever (4)
c. Washer (6)
Position
d. Cotter pin (5)
Install
Bend over end
e. Cap screw (3)
Position
In parking brake lever just far enough to
install spacers (11) on cap screw
f. Two spacers (11)
Position
On cap screw (3)
Position and
g. Clamp (12) and clamp
On parking brake cable (8), then install in
spacer (13)
install
parking brake lever (4) threading screw
through spacer (11), clamp (12) and
clamp spacer (13)
18
a. Parking brake lever (4)
Operator's com-
Position
partment
b. Two lock washers (2),
Install
cap screws (3) and
nuts (1)
2-274
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals