 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-42. PARKING BRAKE MAINTENANCE (cont)
a. Parking Brake Linkage (cont).
REMARKS
ACTION
ITEM
STEP
LOCATION
INSPECTION
Tighten loose hardware; replace missing
Inspect for loose
1
a. Parking brake lever
Operator's com-
hardware
or missing hard-
(4)
partment
ware
Tighten loose hardware; replace missing
b. Parking brake cable (8) Inspect for loose
hardware
or missing hard-
ware
If linkage seems too loose as indicated by
c. Parking brake lever (4)
Apply
lever moving too freely, adjust as
described in step 19 below
REMOVAL
Remove
2
Operator's com-
a. Two nuts (1) and lock
partment
washers (2)
b. Two cap screws (3)
Remove
c. Parking brake lever (4)
Remove
Remove
d. Cotter pin (5)
e. Washer (6)
Remove
f. Pin (7)
Disconnects parking brake cable (8) clevis
Remove
from lever (4)
From lever (4)
g. Parking brake cable (8) Disengage
h. Two spacers(11)
Remove
i. Clamp (12)
Remove
j. Clamp spacer(13)
Remove
3
a. Nut (14) and lock
Remove
Operator's com-
washer (15)
partment, rear
b. Capscrew(16)
Remove
c. Clamp (17)
Remove
4
a. Two nuts (18) and lock Remove
Transmission,
left side above
washers (19)
parking brake
b. U bolt (20)
Remove
c. Parking brake cable (8) Relocate
Away from bracket (27)
d. Plate (21)
Remove
5
Parking brake
a. Cotter pin (22)
Remove
b. Washer (23)
Remove
actuating lever
c. Clevis pin (24)
Remove
Disconnects parking brake cable clevis
from actuating lever
d. Parking brake cable (8) Remove
2-272
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals