Front Drive Shaft Assembly and Support Bearing

TM 10-3930-638-24&P

2-39. AXLES AND DRIVE SHAFT ASSEMBLIES MAINTENANCE (cont)

a. Front Drive Shaft Assembly and Support Bearing (cont).

ITEM

REMARKS

LOCATION

ACTION

STEP

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

Drive shaft support bearing Clean

Use clean cloth moistened with cleaning

solvent P-D-680

(9) and universal joint (17)

All other parts

Clean

Use cleaning solvent P-D-680

INSPECTION

Drive shaft support bear-

Inspect

Replace if cracked, threads damaged, or

ing (9), universal

otherwise damaged

joint (17)

Drive shaft (12)

Inspect

Replace if cracked, bent, or twisted

Inspect

All other parts

Replace if cracked, bent, or threads

damaged

REASSEMBLY/REPAIR

Front drive shaft

a. Universal joint (17)

Position

assembly

b. Four cap screws(16)

Install

and nuts (15)

c. Lubrication fitting (14)

Install

Yoke (4)

Lubrication fitting (13)

Install

2-236