 |
|||
|
|
|||
|
Page Title:
Fuel Filter Assembly (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-15. FUEL SYSTEM MAINTENANCE (cont)
f. Fuel Filter Assembly (cont).
REMARKS
ACTION
ITEM
LOCATION
STEP
INSTALLATION (cont)
In bottom hole of filter head
Install
b. Elbow
4 (cont)
To elbow
Connect
c. Fuel filter to
fuel injection
pump tube
Install
d. Elbow, filter sup-
ply hose, and
hose clamp
e. Three lock wash-
Install
ers (9) and cap
screws (8)
Position
On filter head stud
f. Stud gasket (7)
Apply clean
Tighten filter until gasket contacts filter
g. Secondary fil-
ter (6)
head then tighten 1/2 turn. Loosen
oil to gasket
then install
filter and retighten 1/2 to 3/4 turn to
obtain proper seal
h. Primary fil-
Apply clean
Tighten filter until gasket contacts filter
head then tighten 1/2 turn. Loosen
ter (3)
oil to gas-
filter and retighten 1/2 to 3/4 turn to
ket then in-
stall
obtain proper seal
i. O-ring (5)
Install
On bleed valve plug (4)
Install
In secondary filter (6)
j. Bleed valve
plug (4)
k. O-ring (2)
Install
On drain plug (1)
1. Drain plug (1)
Install
In primary filter (3)
m. Fuel tank shut-
Open
off valve
BLEEDING AIR
Place ignition switch in ON position and
Loosen
5
Secondary fil-
Bleed valve plug
allow air to bleed out of both filters.
ter (6)
(4)
When fuel, free of bubbles, starts to
flow, close bleed valve plug and wipe
parts free of fuel. Place ignition switch
in OFF position
DRAINING MOISTURE
Loosen
Allow fuel to drain until free of `water.
Primary
6
Drain plug (1)
Bleed air from filters as described
filter (3)
above.
2-58
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals