Fuel Filter Assembly (cont). - TM-10-3930-638-24-P0093

TM 10-3930-638-24&P

2-15. FUEL SYSTEM MAINTENANCE (cont)

f. Fuel Filter Assembly (cont).

REMARKS

ITEM

ACTION

LOCATION

STEP

REMOVAL/SERVICING (cont)

Remove and

f. Secondary filter (6)

1 (cont)

discard

Remove and

g. Stud gasket (7)

discard

h. Three cap screws (8)

and lock washers (9)

i. Hose clamp, fil-

Remove

ter supply hose,

and elbow

j. Fuel filter to in-

Disconnect

jection pump

tube

k. Elbow

Remove

1. Filter head (10)

CLEANING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

Use cleaning solvent P-D-680; dry thor-

Clean

Filter head

oughly

INSPECTION

Replace if cracked or threads damaged

Inspect

Filter head

`INSTALLATION

On engine cylinder block

Position

a. Filter head

Engine, right

side

2-57