Section II. OPERATOR/CREW TROUBLESHOOTING PROCEDURES

TM 10-3930-638-10

Section II. OPERATOR/CREW TROUBLESHOOTING PROCEDURES

Para

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Troubleshooting Table . . . . . . . . . . . . . . . . . . . . . . . 3-5

3-4. GENERAL

a. The troubleshooting table (paragraph 3-5) lists

b. This manual cannot list all malfunctions that may

common malfunctions which you may find during opera-

occur, nor all test or inspections and corrective actions.

tion of the forklift truck. You should perform the

If a malfunction is not listed or is not corrected by listed

tests/ inspections and corrective actions in the order listed.

corrective actions, notify your supervisor.

3-5. TROUBLESHOOTING TABLE

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. ENGINE WILL NOT CRANK

Check if ignition switch is turned off.

Step 1.

Place ignition switch in ON position.

Step 2. Check that transmission direction selector is in neutral (N) position.

Place transmission direction selector in neutral (N) position.

3-3