Table 2-1. Operator PMCS

TM 10-3930-638-10

Table 2-1. Operator PMCS

M -- Monthly

D -- During

W -- Weekly

A -- After

B -- Before

ITEM TO BE INSPECTED

Interval

Procedure: Check For And Have Repaired, Filled Or

Equipment is Not Ready/

Item

Available If:

No.

Adjusted As Needed

IMPORTANT: PERFORM WEEKLY AS WELL AS

BEFORE OPERATIONS PMCS IF:

1. YOU ARE THE ASSIGNED OPERATOR AND

HAVE NOT OPERATED THE VEHICLE SINCE THE

LAST WEEKLY.

2. YOU ARE OPERATING THE VEHICLE FOR THE

FIRST TIME.

NOTE

Have the following three operations performed by Organiza-

tional and Direct Support Maintenance at 20 hours to

comply with warranty also if engine is rebuilt or cylinder head

is removed.

1. Replace engine oil and filter.

2. Torque cylinder head bolts.

3. Adjust valve tappet clearance.

EXTERIOR OF VEHICLE

a. Check for leaks or appearance of leaks.

Class III leaks.

b. Visually check Roll Over Protective Structure (ROPS) ROPS is bent, cracked or

and Falling Object Protection Structure (Fops) for obvious damaged or missing

damage.

hardware.

Forks, carriage, side shifter

c. Visually check forks, carriage, side shifter frame for

frame are cracked bent,

cracked, bent, or broken frame members.

or broken.

d. Check lift and side shift chains for 1/2 inch deflection Broken or missing chains.

by depressing chain in center.

e. Visually check wiring harness and connections for

frayed or broken wires.

Towbar is bent, cracked,

f. Check towbar for any bends, cracks or cracked

welds.

or damaged in any way.

STEERING BYPASS VALVE

C h e c k that steering bypass valve is closed

(fully-clockwise) and that shipping lockpin is removed.

ENGINE OIL LEVEL

Check level on dipstick and add oil as required to bring

level up to full mark.

2-10