Figure 6-9. Hydraulic lift cylinder, removal and installation

TM 10-3930-634-34

e. Test. Refer to paragraph 6-5e and test the

(3) Inspect cylinder body for cracks and distor-

extension cylinder in a similar manner.

tion. Check cylinder rod for straightness.

(4) Replace all defective parts.

f. Installation.

d. Reassembly. Refer to figure 6-18 and reassemble

(1) Refer to figure 6-17 and install the extension

the hydraulic extension cylinder.

NOTE

cylinder. Using a suitable lifting device, install the cyl-

inder through the console panel access and boom as-

Upon reassembly, use new packing. Tighten

sembly.

the rod and nut to the torque specified in

paragraph l-7b(8).

(2) Install the top console panel.