Figure4-41.Low clutch, removal and installation

TM 10-3930-634-34

travel by the inching valve and no decrease in clutch

pressure; 16 pounds of pressure causes a 0.10 inch of

adjusted so that the shift hub (17, fig. 4-42) engages

travel and a drop to 35 PSI clutch pressure; 19.5

the output shaft (34, fig. 4-42) when the operator's

pounds of pressure causes 0.55 inch travel and a drop

drive selector control is-in four-wheel drive position,

to 2 PSI clutch pressure; and 21 pounds of pressure

and is completely disengaged from the output shaft

causes a 0.62 inch travel and a drop to 0 PSI clutch

when the drive selector is in two-wheel drive position.

pressure.