Section VIl. MAINTENANCE OF THE EXHAUST SYSTEM

TM 10-3930-634-12

(1) Clean oil filler pipe and cap with dry cleaning

cracks.

solvent P-D-680 and dry thoroughly.

c. Installation. Refer to figure 4-4 and install the oil

(2) Inspect cap seal for deterioration. Replace

filler cap.

defective or damaged seal. Inspect filler pipe for

Section VIl. MAINTENANCE OF THE EXHAUST SYSTEM

4-17. General

a. Removal. Refer to figure 4-5 and remove the

This section contains information on the maintenance

muffler and exhaust pipe.

of those components of the exhaust system which is the

b. Inspection. Inspect the muffler and exhaust pipe

responsibility of organizational maintenance person-

for cracks, dents and rust. Replace defective muffler.

nel. These include the muffler and exhaust pipe.

c. Instal!ation. Refer to figure 4-5 and install the

4-18. Muffler and Exhaust Pipe

muffler and exhaust pipe.

4-6