Operation in Salt Water Areas - TM-10-3930-632-120020

TM 10-3930-632-12

c. If the fork lift truck is splashed or otherwise

c. Keep sand from collecting around axles,

subjected to direct application of salt water, wash it off

steering spindles, and brakes.

d. Wipe sand and dirt from exposed lift and tilt

immediately with fresh water and dry thoroughly.

d. Take extra care to prevent rust and corrosion

cylinder piston rods. Sand is highly abrasive and will

of the exposed piston rods of the lift and tilt cylinders.

cause excessive wear of the mechanical parts.

e. When parking the truck, park it in an

2-12. Operation in High Altitude Areas

enclosed building or cover it with a tarpaulin if an

enclosed building is not available.

Because of the decreased supply of oxygen at high

altitudes, engines operate less efficiently. Take special

2-11.

Operation in Salt Water Areas

care to assure that the air cleaner is properly serviced to

a. Protect all exposed metal surfaces from rust

provide the highest efficiency possible during the high

altitude operation.

and corrosion. Apply grease or oil frequently.

Immediately touch up all chipped and

deteriorated paint.

2-5