Power Steering Cylinder and Drag Link

TM 10-3930-631-34

(10)Install spring and ball assembly (19), spring

6. Nut

(18), adjusting screw (17), new gasket (16) and cap nut

7. Anchor

(15).

8. Lubrication fitting

e. Installation.

9. Cotter pin

10. Plug

(1) Refer to paragraph 2-11 and install steering

11. Seat

pump and motor.

12. Spring

(2) Refer to paragraph 5-2 and check and adjust

13. Socket plug

steering pressure.

14. Socket

54. Power Steering Cylinder and Drag Link

a. Removal. Refer to TM 10-3930-631-12 and

15. Nut

16. Spacer

remove the power steering cylinder and drag link.

17. Lubrication fitting

Remove screws (4, fig. 5-3), lock washers (5) and nuts

18. Lock ring

(6) and remove anchor (7) from frame.

b. Disassembly.

19. Spacer

20. Lock ring

(1) Remove nut (15, fig. 5-3) and remove

21. Seal

spacer (16) from cylinder rod.

22. Packing

KEY to fig. 5-3:

23. Backup washer

1. Cotter pin

24. Wiper

2. Washer

25. Head

3. Pin

26. Nut

4. Screw

27. Piston

5. Lock washer

28. Seal

29. Rod

30. Bearing

31. Tube

5-4