Differences in Models - TM-10-3930-630-120010

TM 10-3930-630-12

1-9

Differences in Models

Firing order ............................... 134-2

Governed speed:

Under load............................ 2000 rpm

Two models of the fork lift truck are covered in this

Without load ......................... 2700 rpm

manual Allis Chalmers models AOCA-24PS100 and

Idle speed............................. 600 rpm

ACCA-24PS180. The only difference between the two

Battery

is the mast and lift cylinders The AOCC40 24PS100 can

Voltage 12

lift 4,000 pounds (1812.0 kg) to a height of 100 inches

Ground Negative

(2540.0 mm), employs a single cluster cylinder, and can

g. Hydraulic System.

be tilted 10 to the rear and 3 forward. The AOC-

Pressure setting:

24PS180 can lift 4,000 pounds (1812.9 kg) to a height of

Engine speed

180 inches (4572.0 mm), employs a cluster cylinder and

2000 rpm .............................. 1950 psi

a single lift cylinder, and can be tiled 5.5 to the rear and

h. Wiring Diagram. Refer to figure 1-3 for

3 forward. All differences affecting maintenance of the

wiring diagram of the fork lift truck.

trucks or components will be covered in the applicable

Data Plates. The truck identification plate

paragraphs.

and shipping plate are mounted on the inside of the right

1-10.

Abbreviation

cowl of the truck.

(1) The identification plate includes type

of truck, type of tires and model number. Also included

The following metric abbreviations appear in this

are the contract, serial and registration numbers, federal

manual The list below will enable the user to understand

stock number and capacity.

their meaning.

(2) The shipping plate includes capacity

centrigrade

of lift, shipping weight and wheel loading weight. It also

centimeter

shows the center of gravity and applicable heights and

kilogram

distances for the important parts of the truck.

meter

millimeter

N.m

Non Newton meter

1-5