Electrical Component Inspection - TM-10-3930-628-120070

TM 10-3930-628-12

4-30.

Electrical Component Inspection

a. General. The following components should

be inspected periodically to maintain the truck in a

serviceable condition. Any damage, wear, or conditions

found that warrant replacement of the component should

be brought to the attention of direct and general support

personnel.

b. Motor Brushes. Remove drip pan and

remove the rear band from the motor. Brushes will

appear through inspection hole in the field yoke (fig. 4-

12). Inspect brush condition and commutator for wear

and damage. Check springs for cracks, damage, and

serviceable condition. Install rear band on motor. Install

drip pan.

Figure 4-12. Brush location

4-14