Section XIII. WHEELS

TM 10-3930-627-12

d. Brake Pedal Free Travel Adjustment.

(1} Remove floor plate.

(2) Remove pedal return spring (1) to more

easily feel the range of free travel.

(3) Adjust push rod (5, fig. 4-19), turn

bellcrank clevis (2) in or out to obtain free travel of 3/8 to

%5 inch at pedal pads.

(4) Install pedal return spring, and floor

plate.

Figure 4-22. Brake and inching pedal adjustment.

Section XIII. WHEELS

(2) Remove the hub cap 112, fig. 4-23).

4-42. General

(3) Remove the cotter pin (10) that locks

This section contains instructions for the maintenance

the adjusting nut (11) to the spindle.

operations which organizational maintenance personnel

(4) Remove the adjusting nut, flat washer

are authorized to perform on the driving (front) wheels,

(9), and bearing cone (8).

the steering (rear) wheels, and the tires.

(5) Remove the wheel (5) from the spindle.

4-43. Steering Wheels and Bearings

(6) Remove the bearing cone (2) and oil

a. Removal.

seal (1) from the spindle.

(1) Jack the steering wheels off the floor

(7) Remove the bearing cups (3 and 7) and

and block the truck securely.

the snap rings (4 and. 61 from the hub.

4-28