Section VII. MAINTENANCE OF HYDRAULIC SYSTEM

Section VII. MAINTENANCE OF HYDRAULIC SYSTEM

Report any damage to organizational personnel.

3-10. General

3-13. Lift and Tilt Cylinders.

The operator is responsible for testing proper operation

Refer to Army Lubrication Order LO 10-3930-625-12.

of the control lever and the servicing of the tilt cylinder

Check for leaks. Refer maintenance to direct and

chain assembly, lift cylinder, oil breather cap, and oil

general support personnel.

reservoir.

3-14. Hydraulic Oil Reservoir.

3-11. Control Lever Operation.

Unscrew cap and check fluid level, adding fluid if

Test for proper tilt and lift operation by actuating the tilt

needed. Fill to cover bottom of strainer with mast down.

and lift controls. Report any defect to organizational

Inspect for dirty breather cap strainer.

Refer

personnel.

maintenance to organizational personnel.

3-12. Chain Assembly

Refer to Army Lubrication Order LO 10-3930-625-12.

3-3