Section XVII. MAINTENANCE OF HYDRAULIC LIFT COMPONENTS

b. Cleaning and Inspection.

(1) Clean the outside of cylinder with a cloth

dampened with cleaning solvent.

(2) Inspect cylinder for cracks, leaks, dents,

distortion, corrosion, and other damage. Replace .he

power steering cylinder if damaged.

c. Installation. Install the power steering cylinder

by reversing the removal procedure.

Figure 4-57. Power steering cylinder removal.

Section XVII. MAINTENANCE OF HYDRAULIC LIFT COMPONENTS

4-60. General

The lift and tilt cylinders are operated by means of

hydraulic pressure.

The hydraulic lift components

described in this section consist of the following; tilt

cylinder, lines and fittings, oil reservoir, oil filter and oil

reservoir breather.

4-61. Tilt Cylinder

a. Adjustment.

(1) Use a protractor to obtain the propel

degree of mast tilt.

(2) Set the protractor at 8 and place the

protractor on the back of the mast. Tilt the mast to the

end of the backward stroke. Refer to figure 4-58.

Figure 4-58. Checking mast tilt angle.

4-47