Accelerator Controls

b. Service. Thoroughly clean the bowl and screen.

If there is excessive dirt on the screen or in the bowl,

check the fuel tank and source of supply.

c. Installation. Installation is a direct reversal of

the removal procedure.

4-24. Accelerator Controls (fig. 4-12)

a. Maintenance and Adjustment.

(1) Inspect the linkage for secure mounting,

presence of pins, spring tension, and proper action.

(2) Periodically lubricate the moving parts of

the linkage, except for shaft mounting blocks.

(3) Use the following procedure to adjust the

rod length. Refer to figure 4-12.

Figure 4-11. Fuel filter.

4-18