Disassembly - TM-10-3930-620-340075

(14) Remove adjusting screw (74), spring (73),

(23) Repeat steps (8) through (11) for

poppet "E" (72), preformed packings (70, 68, and 64),

disassembly of side shift plunger section.

and backup rings (63 and 69) from plug (71). Count and

(24) Repeat steps (9) through (11) for

record the number of turns required to remove the

disassembly of side shift wiper section.

adjusting screw.

(25) Remove plug (13) and preformed packing

(15) Remove poppet "K" (62) from cap (61).

(14) from inlet housing.

(16) Remove poppet "D" (65), and preformed

(26) Remove acorn nut (7) jamnut (9), and

packing (70) from poppet "K".

copper washers (9) from relief valve assembly.

(17) Remove spring (50), poppet (49), and

(27) Turn relief valve assembly out of inlet

preformed packing (48), from lift plunger section.

housing. Flats are provided on cap to remove relief

(18) Remove tilt plunger section from tie rods.

valve assembly.

(19) Remove plugs and preformed packings

(28) Remove adjusting screw (10) spring (11),

from housing.

poppet "E" (12), preformed packings (14, 16, and 20)

(20) Repeat steps (8) through (11) for

and backup rings (15 and 21) from plug (13). Count and

disassembly of tilt plunger section.

record the number of turns required to remove the

(21) Repeat steps (9) through (11) for

adjusting screw.

disassembly of tilt wiper section.

(29) Remove poppet "K" (22) from cap (23).

(22) Remove preformed packing (36) from left

(30) Remove poppet "D" (19) and backup ring

section.

(21), preformed packing (20), spring (17) and piston (18)

from poppet "K".

3-47