Section XIV. CONTROLS AND INSTRUMENTS

Section

XIV.

CONTROLS

AND

INSTRUMENTS

b. Installation. Refer to figure 4-36 and install

4-51.

General

t h e rear axle disconnect indicator light.

This section contains information on the main-

t e n a n c e of all the controls and instruments of the

4-60. Engine Oil Pressure Gage

truck

forklift

which

the

responsibility

a . Removal. Refer to figure 4-36 and remove the

organizational maintenance.

e n g i n e oil pressure gage.

WARNING

b. Installation. Refer to figure 4-36 and install

Disconnect battery ( ) cable from

t h e engine oil pressure gage.

battery before disconnecting any wiring

4-61.

Brake

Oil

Pressure

Gage

and

Valve

under dash.

(Model

RTL10)

4-52.

Ammeter

a . Removal. Refer to figure 4-36 and remove the

a . Removal. Refer to figure 4-36 and remove he

b r a k e oil pressure gage and valve.

ammeter.

b. Installation. Refer to figure 4-36 and install

b . Installation. Refer to figure 4-36, and install

t h e brake oil pressure gage and valve.

the ammeter.

4-62. Engine Coolant Temperature Gage

4-53. Toggle Switches

a . Removal. Refer to figure 4-36 and remove the

engine coolant temperature gage.

t o g g l e switches.

b. I n s t a l l a t i o n . Refer to figure 4-36 and install

b. Installation. Refer to figure 4-36 and install

t h e engine coolant temperature gage.

t h e toggle switches.

4-63. Torque Converter Temperature Gage

4-54. Hourmeter

a . Removal. Refer to figure 4-36 and remove the

torque

converter

temperature

gage.

hourmeter.

b. Installation. Refer to figure 4-36 and install

b . Installation. Refer to figure 4-36 and install

t h e torque converter temperature gage.

t h e hourmeter.

4-64. Horn Button

4-55. Panel Lights

a . Removal. Refer to figure 4-36 and remove the

horn

button.

panel lights.

b . Installation. Refer to figure 4-36 and install

b. Installation. Refer to figure 4-36, and install

the horn button.

the panel lights.

4-65.

Bank

Indicator

(RTL10-1)

4-56. Push Switch

a . Removal. Refer to figure 4-36 and remove the

bank

indicator.

push switch.

b . Installation. Refer to figure 4-36 and install

the bank indicator.

the push switch.

4-66. Clutch Oil Pressure Gage

4-57. Light Switch

a . Removal. Refer to figure 4-36 and remove the

c l u t c h oil pressure gage.

light switch.

b. Installation. Refer to figure 4-36 and install

t h e clutch oil pressure gage.

t h e light switch.

4-67. Hydraulic Control Levers

4-58. Master Switch

a . Removal. Refer to figure 4-36 and remove the

a. Removal. Refer to figure 4-36 and remove the

hydraulic

control

levers.

master switch.

b. Installation. Refer to figure 4-36 and install

b . Installation. Refer to figure 4-36 and install

t h e hydraulic control levers.

t h e master switch.

4-59. Rear Axle Disconnect Indicator Light

a . Removal. Refer to figure 4-36 and remove the

r e a r axle disconnect indicator light.

4-39