Figure 4-2. Torque converter and transmission assembly,disassembly and reassembly (sheet 11 of 13).

TM 10-3930-242-34

Figure 4-2. Torque converter and transmission assembly,

disassembly and reassembly (sheet 11 of 13).

i. Linkage Adjustment.

sion at normal operating temperature (180 to

200 F.).

(1) Range selector linkage. The linkage must

(3) Lubrication oil pressure. The lubrication

b e adjusted so that the operator's control is

oil pressure should be 20-25 psi when the

positioned to correspond exactly to the detent

t r a n s m i s s i o n is in low range, forward, with the

p o s i t i o n s of the range selector valve. With the

o u t p u t stalled and the transmission at normal

l i n k a g e disconnected, place both the selector

o p e r a t i n g temperatures (180 to 200F.) and the

valve and the operator's control in neutral posi-

e n g i n e running at 1,000 rpm.

tion. Adjust the linkage so that it can be freely