Tabulated Data - TM-10-3930-242-340028

TM 10-3930-242-34

Model --------------------------- 3331-1

Ratio to engine speed -------1:1

T y p e - - - - - - - - - - - - - - - - - - - - - Torque converter and plane-

(5) Generator regulator.

tary gear

Manufacturer ------------------ Delco-Remy

Rating:

Volts

----------------------- 24V, dc

Maximum input speed ------ 300 ft-lb net

(6) S t a r t e r .

Maximum input torque ------ 3,000 rpm

Manufacturer -------------------- Delco-Remy

Maximum input --------- 175 gross hp (horsepower)

Volts ------------------------ 24V, dc

Rotation, viewed from input

(7) S t e e r i n g a d j u s t m e n t s .

end:

Front steering linkage:

Input ------------------------- Clockwise

Length between pivot

Output, forward opera-

centers

--------------

in.

tion.

Rear steering linkage:

Gear ranges, selector posi-

Length between pivot

tions:

centers ----------------- 21.484 in.

F o r w a r d - - - - - - - - - - - - - - - - 3 speeds

Length between grease

R e v e r s e - - - - - - - - - - - - - - - - 3 speeds

fittings --------------- 21 7/8 in.

Range control ----------- Low, intermediate, and high

Steering mode cylinder:

Direction control -------- Forward, neutral, reverse

Length is adjusted so

Torque converter:

holes in intermediate

T y p e - - - - - - - - - - - - - - - - - - - Single-stage, polyphase, 3-

link and pitman arm are

element, free-wheeling

aligned

stator

Front drag link

Elements ----------------------------- Pump, turbine, stator

Length between pivot

Torque multiplications:

centers

---------------

5/8in.

R a t i o s - - - - - - - - - - - - - - - - - - TC 320-3.50:1

Rear drag link

Gear data:

Length between pivot

Direction and range

centers --------------- 45 1 5/16 i n .

gears ------------------------------ 10-pitch, straight spur

planetary

( 8 ) Nut, bolt, stud and pipe plug torque data.

Transfer gears --------------- 4-pitch, straight spur

The following specifications apply to clean, dry

Accessory gearing ------------ 6-pitch, straight spur

threads. Reduce the torque 10 percent when the

Clutch data:

Type ------------------------- Multidisk, hydraulic-actuated

threads are clean and oiled.

spring-reieased, oil-cooled;

(a) E x c e p t i o n s t o s t a n d a r d b o l t a n d n u t

automatic compensation for

torque specifications.

wear

Material ---------------------- Reaction plates--steel friction

Size Nut

Torque

Application

(ft.lb)

or Bolt

plates-sintered bronze on

steel

Injector Control Shaft Bracket

Parking brake:

Bolts

-20

1012

Size ------------------------------- 133/8 x 2

Cam Follower Guide Bolts

-20

12-15

Type --------------------------- Expanding shoe, mechanical

Governor to Flywheel Housing

5/16-18

1012

Rating ------------------------------ 45,000 inch-pound at 2,100 lb

Idler Gear Hub and Spacer Bolts

19-23

5/16-18

apply force

Idler Gear Hub and Spacer Bolts

4045

3/8-16

Flanges:

Flywheel housing Bolts

3/8-16

25-30

Input (remote mount) --------- Mechanics 6C, 7C; Spicer

Injector Clamp Bolts

20-25

3/816

1500,1600; Rockwell 5N

Air Box Cover Bolts

12-16

3/8-16

R e a r - - - - - - - - - - - - - - - - - - - Mechanics 6C, 7C, 9C; Spicer

Connecting Rod Nuts Lubricated

40-45

3/8-24

1500, 1700; Rockewell 5N, 6N

Connecting Rod Nuts (Plain)

50-55

3/8-24

Front ---------------------------- Mechanics 6C, 7C, 9C; Spicer

Flywheel Housing Bolts

25-30

3/8-24

1600; Rockwell 5N, 6N

Fuel Line Nuts

12-15

3/8-24

Oil system:

3/8-24

Fuel Connector

20-28

Oil pump (pressure) --------- Input driven, gear type, posi-

Rocker arm Bracket Bolts

50-55

7/16-14

tive displacement

*Flywheel Bolts

110-120

-20

Oil capacity; US gal ------- Initial fill 7.5; refill 5.5

*Main Bearing Cap Bolts

120-130

9/16-12

Oil cooler ------------------------ Heat exchanger

*Cylinder Head Bolts

170-180

5/8-11

Converter-out oil

Flange Mounted Air Compressor

temperature ----------------------- 250 F. maximum

Drive Shaft Nut

3/4-10

Main pressure ---------------- 110 to 135, or 135 to 155 psi at

Crankshaft End Bolt

3/416

200-220

full throttle stall

Crankshaft End Bolt (In-Line en-

Lubrication oil pressure ----- 20 to 25 psi

gines with cone mounted pulleys

Steer pumpd rive:

not stamped with the letter "A"

290-310

3/4-16

Rating -------------------------------- 15 hp continuous

Air Compressor Drive Pulley Nut

3/4-16

80-100

Ratio to engine speed ----------- 1:1

Power takeoff

Rating -------------------------- 50 hp continuous, 80 hp inter-

mittent (subtract 15 hp

when steer pump is used)

ent

1-2