 |
|||
|
|
|||
|
Page Title:
Figure 88. Steering wheel with puller attached. |
|
||
| ||||||||||
|
|
 Figure 88. Steering wheel with puller attached.
(2) Check gears for nicks, burs, cracks, or
(7) Remove gasket seal (18) from cover (10).
chipping.
(8) Remove bearing covers (14 and 30), driven
(3) Examine gear chamber of body for
gear (15), drive gear (29), and body
evidence of gears contacting body,
bearings (16 and 28) from body (19).
especially the intake cavity of the body.
(9) Remove spring (13), ring seals (12), and
(4) Inspect the body and bearings for
backup washers (11) from cover (10).
irregularities of the bore caused by bearing
(10) Remove preformed packing (5) from cover
attempting to turn.
(10).
(5) Examine bearings and body for signs of
(11) Remove retaining ring (7) and shaft seal
scratches or pitting.
(31) from cover (10).
(6) Replace defective parts with serviceable
(12) Unscrew plugs (22 and 23).
Remove
ones.
spring (24) and ball (25).
d. Assembly.
c.
Cleaning, Inspection, and Repair.
(1) Lubricate all parts with hydraulic fluid
(1) Clean all parts in SD.
before assembly.
(2) Reverse procedures in b above.
105
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals