Figure 50. Adjusting voltage regulator.

TM 10-3930-222-20

(2) Disconnect the secondary lead assembly

(4) Remove the retaining ring (2) from the

at coil.

headlight assembly.

(3) Unscrew and remove the bolts, nuts, and

(5) Remove the lamp (3) from the body (1).

lockwashers that secure the coil to

b. Assembly and Installation. Reverse procedures

bracket and remove the coil.

in a above.

b. Installation. Reverse procedures in a above.

c. Adjustment. Adjust the headlight by loosening

49. Headlight

the capscrew and turn the headlight to the right or left.

Tighten the capscrew to secure adjustment.

a. Removal and Disassembly.

(1) Disconnect the headlight electrical lead at

50. Stoplight-Taillight

the headlight.

a. Removal.

(2) Remove the capscrew (9, fig. 63) and

lockwasher (8) that secure the headlight

(1) Disconnect the stoplight-taillight electrical

to the bracket and remove the headlight.

lead at the connector.

(3) Remove the screw (6) and nut (5) and

(2) Remove the nuts (1, fig.

remove rim (4) from the headlight

lockwashers (2) that secure the taillight to

assembly.

the bracket and remove the tail light.

Figure 50. Adjusting voltage regulator.