 |
|||
|
|
|||
|
Page Title:
Figure 12. Engine removed from truck, left view. |
|
||
| ||||||||||
|
|
 TM 10-3930-222-20
Figure 12. Engine removed from truck, left view.
(5)
Remove the nuts that secure the
(10) Remove the nuts and lockwashers that
transmission oil filter bracket (3) to the
secure the head to the block and remove
head (6) and lay the bracket assembly to
from the truck.
one side.
(11) Remove the gasket from the block.
(6)
Remove the nuts that secure the
(12) Unscrew and remove the stud from the
distributor (4) to the head and lay the
block if necessary.
distributor to one side.
b. Clearing and Inspection.
(7)
Remove the nuts that secure the coil and
air cleaner bracket (5) to the head and lay
bracket assembly to one side.
(1)
Remove all carbon from combustion
(8)
Unscrew and remove the temperature
areas, using a scraper and wire brushes.
sending unit (7) from the head.
(2)
Clean the cylinder head thoroughly with
(9)
Remove the nuts that secure the engine
SD.
oil filter bracket (8) to the head and lay the
(3)
Make sure that gasket contact surfaces on
bracket assembly to one side.
the head and block are clean, smooth,
and flat.
51
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals