|
|
LUBRICATION ORDER
LO 10-3930-643-12
Note 3.
HYDRAULIC RESERVOIR
This model has a transmission
5.
oil sample valve.
Check fluid level on sight gage (4).
The ball must be floating near the
6. The cab has windows and a door.
top of the gage (4). If not, remove
require
oi1
The
hinges
cap and add hydraulic fluid at
occasionally.
filler pipe (5).
Note 1.
ENGINE CRANKCASE
Engine oil must be checked with the
engine off and stopped for 10
minutes. This allows all oil to
drain back into crankcase. Use
dipstick (1) to check the oil level.
The level must be between ADO and
Note 4.
ARTICULATED PIVOTS
FULL . If the level is at ADD or
lower, add oil using filler pipe (2)
There is an upper and a
1ower
to bring the level up to FULL on the
fitting (6 and 7) for each pivot.
Apply lubricant to each fitting
until clean lubricant appears.
Note 2.
TRANSMISSION OIL
Note 5. FORK LINK
Transmission oil must be checked
with engine running at low idle, and
Apply lubricant to both fittings (8
transmission in neutral and locked.
and
9)
until
clean
lubricant
Transmission oil reading on dipstick
appears.
(3) should indicate between ADD and
FULL. If the level is at ADD or
lower, add oil using filler pipe, to
bring the level up to read FULL on
the dipstick.
Card 8 of 17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |