DRIVE AXLE BREATHER

NOTES - CONTINUED:

10.

DRIVE AXLE BREATHER. Each 250 operating

16.

LUBRICANTS.

The following is a list of

hours clean breather in dry cleaning solvent.

lubricants with military symbols and applicable

specification numbers.

11.

HYDRAULIC TANK BREATHER. Each 1000

OE/HDO

MIL-L-2104

operating hours clean breather in dry cleaning solvent.

MIL-L-2105

GAA

MIL-G-10924

12.

HYDRAULIC TANK. Each 50 operating hours

OEA

MIL-L-46167

check oil level and fill to "FULL" mark. If oil is

BFS

MIL-B-46176

contaminated, drain system and tank. Remove filter

(SD), Type II

P-D-680

element, clean filter housing and install new filter

GGP

MIL-G-23549

element and gasket and refill with clean oil. Operate

hydraulic system for 5 minutes, check for leaks, check

level and bring to "FULL" mark.

Copy of this Lubrication Order will remain with the

equipment at all times, instructions contained herein are

13.

HYDRAULIC TANK FILTER.

Each 1000

mandatory.

operating hours, remove filter element, clean filter shell

and install new filter element and gasket.

After

By order of the Secretary of the Army:

replacement, operate hydraulic system for 5 minutes,

check for leaks, check level and bring to "FULL" mark.

JOHN A. WICKHAM, JR.

General, United States Army

14.

GENERATOR. Each 250 operating hours place

Chief of Staff

3 drops of OE/HDO into each oiler cup. Do not over

OFFICIAL:

lubricate generator and do not use PL.

ROBERT M. JOYCE

Major General, United States Army

15.

DISTRIBUTOR.

Each 250 operating hours

The Adjutant General

place 2 drops of OE/HDO in breaker cam wick and wipe

DISTRIBUTION:

trace of GAA on breaker cam. Remove plug at base and

To be distributed in accordance with DA Form 1225A,

place

nine

drops

OE/HDO

opening.

Operator and Organizational maintenance requirements

for Fork Lift Trucks.

TA220720

LO 10-3930-222-12

U.S. GOVERNMENT PRINTING OFFICE: 1984-420-903/246

CARD 6 0F 6