16-19. 6K FORK SIDESHIFT CYLINDERS REPAIR (CONT)
Use solvent to clean threads of
cylinder tube (3) and apply sealing
compound. Install outer piston (7)
onto cylinder tube (3). Install
setscrew (14) in piston. Stake
Use solvent to clean threads of inner
gland (2) and outer gland (5). Apply
sealing compound to threads of
Clean threads inside barrel (6).
Slide outer piston (7) with cylinder
tube (3) as an assembly, into barrel.
(m) Install outer gland (5) into barrel
(6). Tighten outer gland until it is
flush with end of barrel. Do not over
tighten outer gland.
Use care when installing rod and
piston assembly. Keep rod in line
with barrel to prevent binding.
Slide inner piston (4), inner gland
(2), and rod (1) as an assembly in
barrel (6). Use a spanner wrench to
tighten inner gland until it is flush
with end of barrel.
Follow-on Maintenance: Install fork sideshift cylinder (TM 10-3930-673-20).
END OF TASK