Differential and ring gear weighs approximately 100 lb (45.4 kg). Attach suitable lifting
device prior to removal to prevent possible injury to personnel.
Remove differential and ring gear assembly (13) from differential carrier (3).
Mark one carrier leg (A) and bearing cap (14) to aid in assembly.
Remove two cotter pins (15) from bearing adjusting rings (16). Discard cotter pins.
Remove two screws (17) and washers (18) from bearing caps (14).
Remove two bearing caps (14) and bearing adjusting rings (16) from differential carrier (3).
Use suitable sling to lift the main differential and ring gear (13) from carrier (3). Place
assembly on bench.