3-14. FLYWHEEL REPLACEMENT (CONT)
Flywheel assembly weighs in excess
of 125 lbs (56.75 kg). Attach suitable
lifting device prior to removal to
prevent possible injury to personnel.
Do not use timing pin to lock the
engine. Using timing pin as a
locking device while loosening
flywheel mounting hardware could
damage the pin.
Remove flywheel (9) while keeping
the crankshaft from turning.
Install two long screws in vibration damper. Use a bar between the long screws to hold
Attach a suitable lifting device and hoist, with a capacity of at least 200 lbs (90.72 kg), to
Firmly hold barring tool to keep flywheel (9) from turning. Loosen eight screws (10).
Remove barring tool. Remove eight screws (10), washers (11), and flywheel (9). Discard screws
b. Cleaning. See Cleaning Instructions (Para 2-12).
c. Inspection. See Inspection Instructions (Para 2-14).