Flywheel assembly weighs in excess
of 125 lbs (56.75 kg). Attach suitable
lifting device prior to installation to
prevent possible injury to personnel.
Do not use the timing pin to lock the
engine. Use a barring tool to hold
the engine crankshaft during
flywheel installation. Using the
timing pin as a locking device while
tightening the flywheel mounting
hardware could damage the pin.
Install flywheel (9). Use barring tool
to keep the crankshaft from turning.
Use new screws (10) and
Attach a suitable lifting device and
hoist, with a capacity of at least
200 lbs (90.72 kg), to the flywheel.
Install new screws each time
flywheel is removed to help prevent
possible engine failure.
Position flywheel (9) against end of crankshaft and install eight screws (10) and washers (11).
Remove hoist and lifting device.
Install barring tool between long screws in vibration damper.