Remove 14 screws (5) and six
screws (6) from cylinder head (2).
Work from center to ends of cylinder.
Remove cylinder head (2).
The cylinder head weighs 114 lb
(51.71 kg). Attach suitable lifting
device prior to removal to prevent
possible injury to personnel.
Attach lifting chains and hoist (or
other suitable lifting device) to
engine lifting brackets.
Do not lower cylinder head onto a
flat surface as this could damage
Slowly and carefully lift cylinder
head (2) from cylinder block and
place it on a suitable stand or
platform that will support bottom
perimeter of the cylinder head.
Remove gasket (7) from cylinder
head (2). Discard gasket.
Remove engine lifting brackets
Tag and mark intake and exhaust
valves (8 and 9) locations in cylinder