18-18. ATTACHMENT REPLACEMENT (CONT)
· Using suitable lifting device to support
attachment (1) at hose retaining tabs
on top of attachment.
· Adjust lifting device as required to take
weight off pin during removal.
Fully remove pin (18) and shim washer(s)
(19) to separate attachment (1) from boom
Using suitable lifting device, remove
attachment (1) from boom (20).
Start engine and carefully retract boom
(TM 10-3930-673-10) to separate
attachment (1) from boom (20). Stop
Place attachment (1) on suitable supports
and remove lifting device.