Attachment weighs approximately
2500 lb (1133.98 kg). Use suitable
lifting device to remove or injury or
death to personnel could result.
Using suitable lifting device and
lifting strap, support attachment
Place container under disconnected
hoses to catch draining hydraulic oil.
Tag, mark, and disconnect four
hydraulic hoses (2 through 5) from
fittings (6 through 9). Install plugs
to hose ends.
Remove four quick disconnects (10),
nuts (11), and fittings (6 through 9)
from attachment (1).
Tag, mark, and remove hose (12)
from clip (13) and attachment (1).
(5.1) Remove bolt (13.1), two washers
(13.2), and clamp (13.3) from boom.
(5.2) Secure lifting strap underneath
body of attachment lift cylinder (14)
and around inner boom to support
attachment lift cylinder.
Ensure that cylinder is securely
supported with lifting strap prior to
removing pin. Failure to do so may
cause personal injury or death and
damage to cylinder.
(5.3) Remove locknut (15), screw (16),
and pin (17) to disconnect rod end of
attachment cylinder (14) from