7-5. WATER PUMP REPLACEMENT
This Task Covers:
Equipment Condition (Cont)
Tools and Special Tools
Air conditioner compressor drive belt removed (Para
Tool Kit, General Mechanic's: Automotive
(Item 18, Appendix F)
Left-hand fan guard removed (Para 7-7)
Shop Equipment, Automotive Maintenance, Common
Fan drive belt removed (Para 7-9)
No. 2 Less Power
(Item 15, Appendix F)
Wrench, Torque, 3/8 inch drive, 0-800 lb-in
(0-7081 N·m) (Item 23, Appendix F)
Engine OFF and cool (TM 10-3930-673-10)
Coolant drained (Para 7-2)
a. Removal. Remove two screws (1), water pump
(2), and gasket (3) from engine block (4). Discard
b. Cleaning/Inspection. Clean water pump gasket
mating surface of engine block (4).
Position gasket (3) in groove on water pump
Install gasket (3) and water pump (2) on
engine block (4) with two screws (1). Tighten
216 lb-in. (24.4 N·m).
· Install fan drive belt (Para 7-9).
· Install left-hand fan guard (Para 7-7).
· Install air conditioner compressor drive belt
· Fill engine cooling system with coolant (Para 7-2).
END OF TASK