 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FRONT HOUSING AND COVER MAINTENANCE - CONTINUED
0280 00
REMOVAL - CONTINUED
2.
Remove long capscrew (3) and belt guide (4).
3.
Remove eight capscrews (5) and eleven short cap-
screws (6) from gear cover (7).
4.
Remove gear cover (7) and gasket (8). Discard gasket.
6
5.
Remove camshaft and timing gear (WP 0278 00).
6.
Remove fuel injector pump (WP 0224 00 or WP 0225
11
7.
Remove two capscrews (5) and five short capscrews
10
(6) from gear housing (9).
9
5
8
8.
Remove gear housing (9) and gasket (10). Discard
gasket.
7
6
12
345
409-1029
9.
Use a gasket scraper to remove old gasket material
from cylinder block (11) and gear housing (9).
DISASSEMBLY
1.
If necessary, remove oil seal (12) from gear cover (7). Discard oil seal.
2.
Remove two capscrews (13) which retain the timing
14
18 15 17
pin housing (14).
16
3.
Remove timing pin (15) and housing (14) as an assem-
13
bly.
4.
Remove rectangular ring seal (16) from housing (14).
Discard rectangular ring seal.
20
5.
Remove retaining ring (17) from housing (14).
23
6.
Remove timing pin (15) from housing (14).
21
19
7.
Remove and discard O-ring (18).
8.
If necessary, remove dataplate (19) from gear housing
(9) by removing two drive screws (20).
9
22
409-1030
9.
If necessary, remove cover plate (21) and gasket (22) from back of gear housing (9) by removing two capscrews (23).
Discard gasket.
CLEANING
See cleaning instructions (WP 0316 00).
INSPECTION
See inspection instructions (WP 0317 00).
0280 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals