Section IX. OPERATOR'S SEAT

TM 10-3930-632-12

Figure 4-2. Overhead Guard and Floor Plate, Removal and Installation

b. Removal. Remove the accelerator pedal

c. Installation. Lift new overhead guard into

and necessary linkage to facilitate removal of floor

position on lift truck. Align mounting holes and install

plate. Loosen and remove mounting hardware al shown

mounting hardware. Tighten hardware securely.

4-18. Floor Plate

in figure 4-2. Lift floor plate out of lift truck.

a. Inspection. Periodically inspect floor plate

for damage and security of mounting hardware.

Section IX. OPERATOR'S SEAT

4-19. General

seat by pulling out on the lever. Slide the seat forward

or back as required. Release the latch mechanism to

A one man seat is provided for the lift truck operator.

lock the seat in position.

The seat has padded seat and back-rest panels and is

b. Removal. Remove the operator's seat by

forward-to-back adjustable.

4-20. Operator's Seat

referring to figure 4-3, and removing nuts (8),

a. Adjustment. The operator's seat may be

lockwashers (9), capscrews (12) and washers (13). Lift

entire seat assembly from engine cover.

adjusted to suit individual requirements. To adjust,

release the latch mechanism on the right side of the

4-16