Figure 4-30. Battery compartment covers, removal and installation.
Remove battery compartment side
4-44. Floor plates
panels (fig. 4-30) by using hand holes and lifting panels
a. General. To gain access to components the
floor and toe plates may have to be removed.
(1) Install side panels (fig. 4-30) in position
b. Removal. Inspect floor and toe plates for dents
and damage. Replace if necessary.
(2) Install hinged battery cover on truck and
(1) Remove two screws and remove floor
secure front hinge with four screws and nuts.
plate (fig. 4-31) from truck.
Change 2 4-37