Figure 2-2. Controls and instruments.

TM10-3930-628-12

CONROLS

1. HORN BUTTON - DEPRESS BUTTON TO SOUND HORN.

2. STEERING WHEE L - ROTATE WHEEL IN DIRECTION DESIRED TO TURN TRUCK.

3. FORWARD AND REVERSE CONTROL LEVER - MOVE LEVER UP TO "F" POSITION TO MOVE TRUCK

FORWARD; MOVE LEVER DOWN TO "R" POSITION TO MOVE TRUCK TO REAR; POSITION LEVER IN

"N" (NEUTRALT POSITION TO PARK OR HALT OPERATION. LEVER SHOULD SNAP INTO EACH

POSITION.

4. LIFT CONTROL LEVER -MOVE LEVER TO REAR TO LIFT FORKS; MOVE LEVER FORWARD TO LOWER

FORKS.

5. TILT CONTROL LEVER - MOVE LEVER FORWARD TO TILT MAST FORWARD; MOVE LEVER TO REAR

TO TILT MASS BACKWARDS.

6. KEY SWITCH - TURN KEY TO RIGHT TO ACTUATE CI RCUITS.

7. ACCELERATOR - DEPRESS PEDAL TO START TRUCK IN MOTION AND TO INCREASE SPEED;

RELEASE TO DECREASE

8. SERVICE BRAKE PEDAL - DEPRESS PEDAL TO APPLY BRAKES AND STOP TRUCK SPEED.

9. EMERGENCY STOP SWITCH - DEPRESS SWITCH BUTTON TO HALT ALL ELECTRICAL OPERATION.

10. LIGHT SWITCH - PULL SWITCH OUT TO TURN ON LIGHTS

INSTRUMENTS

.1. HOURMETER-OPERATES WHEN KEY SWITCH IS TURNED ON. RECORDS HOURS OF OPERATION.

2. INDICATOR LIGHT- LIGHT GLOWS GREEN WHEN KEY SWITCH IS ON, INDICATING CIRCUITS ARE

OPERATING.

ME 3930-628-12/2-2

Figure 2-2. Controls and instruments.

2-3