Section II. MOVEMENT TO A NEW WORLSITE

TM10-3930-628-12

Section II. MOVEMENT TO A NEW WORLSITE

2-3. Dismantling for Movement

refer to figure 2-1 and install the forks on the

The only component that may require dismantling

carriage.

for movement is the forks. If necessary to conserve

2-5. Normal Movement

space when transporting the lift truck by means of

The fork lift truck is fully mobile and can normally

another carrier, refer to figure 2-1 and remove the

be' moved to a new worksite under its own power.

forks.

2-4. Reinstallation after Movement

If forks were removed to transport the lift truck,

Section III. CONTROLS AND INSTRUMENT

2-6.

General

2-7.

Controls and Instruments

This section describes, locates, illustrates, and furnishes

Refer to figures 2-2 and 2-3 for the purpose, normal

the operator, crew, or organizational maintenance

readings, and location of all controls and instruments.

personnel sufficient information to insure proper

operation of the fork 'lift truck.

2-2