 |
|||
|
|
|||
|
Page Title:
Transmission and Torque Converter - continued |
|
||
| ||||||||||
|
|
 (5) Remove 12 capscrews (26, fig. 2-6) and
washers (1 and 2) and remove torque
washers (27) attaching transmission to engine
converter (4) from flywheel.
assembly.
(6) Disconnect all inching and shifting
Note.
linkage from top of transmission assembly. Draw
Mark flywheel to indicate bolt hole
transmission forward from engine until splined
nearest timing marks on drive plate
shafts of clutch assembly (5) are free of torque
so torque converter can be installed
converter and remove from truck. Remove six
in correct position.
screws
KEY to figure 2-6:
1.
Washer
2.
Screw
3.
Screw
4.
Seal
5.
Clutch assembly
6.
Gasket
7.
Plug
8.
Housing
9.
Gasket
10.
Washer
11.
Screw, 1 1/8 in. long
12.
Screw, 2 1/4 in. long
13.
Control valve
14.
Gage
15.
Tube
16.
Gasket
17.
Gasket
18.
Washer
19.
Screw
20.
Nut
21.
Stud
22.
Nut
23.
Plug
24.
Screw
25.
Washer
26.
Screw
27.
Washer
28.
Plug
29.
Strainer
30.
Gasket
31.
Gasket
32.
Plate
33.
Washer
34.
Screw
35.
Plug
36.
Copper washer
37.
Spring
38.
Ball
39.
Case front half
2-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals